[CQ] colour displacement irc 2550

[roho]

good afternoon. I'm getting colour displacement in the sub scan direction. Changed an overdue cleaning and xfer assembly, since the displacement was not even throughout the prints. Not too much difference. Since the k is the reference, was wondering if a poor k unit could cause this. Any suggestions? Thanks!

[teckat]

good afternoon. I'm getting colour displacement in the sub scan direction. Changed an overdue cleaning and xfer assembly, since the displacement was not even throughout the prints. Not too much difference. Since the k is the reference, was wondering if a poor k unit could cause this. Any suggestions? Thanks!

is displacement for black only ??
are u using OEM Toner

Removing the noise dampening pad for the Registration sensor flag and then performing Reg-Clear, Quick Adjust and then adjusting the IMG-REG resolved the issue.