ir advanced 8105

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • matt01fish
    technician
    • Mar 2011
    • 12
    #1

    [Electrical] ir advanced 8105

    Hi everyone,

    ive goi an iradv8105 thats tripping the mains spur its on and blowing the fuse in the plug, happens when u insert unit 1 and lift handle, any ideas ive checked all obvious avenues, no short to the frame from the fuser etc, the 'ih' has been replaced and all connector blocks on back of unit 1. m/c powers up fine with unit 1 out. we have previously had to replace the fuser psu for an E808 error. any help would be greatly appreciated.
    Tags: 105, back, connector, error, fuse, fuser, lift, nec, psu, unit
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092
      #2
      Re: ir advanced 8105

      Originally posted by matt01fish
      Hi everyone,

      ive goi an iradv8105 thats tripping the mains spur its on and blowing the fuse in the plug, happens when u insert unit 1 and lift handle, any ideas ive checked all obvious avenues, no short to the frame from the fuser etc, the 'ih' has been replaced and all connector blocks on back of unit 1. m/c powers up fine with unit 1 out. we have previously had to replace the fuser psu for an E808 error. any help would be greatly appreciated.

      have u replaced the new updated THM-1 /upper main thermistor ??
      FK2-7692-000 for 8000 series
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • matt01fish
          technician
          • Mar 2011
          • 12
          #3
          Re: ir advanced 8105

          Originally posted by teckat

          have u replaced the new updated THM-1 /upper main thermistor ??
          FK2-7692-000 for 8000 series

          yeah replaced all thermistors and subs..

            Comment

            Previous template Next
            Working...