Pcb downloader

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cableties
    Technician
    • Jan 2010
    • 35
    #1

    Pcb downloader

    Is it posible to upgrade firmware for adf or finisher without pcb downloader? Any input is apriecate tq in advance.
    Tags: 250, adf, advance, copyi, finisher, firmware, input, pcb, upgrade
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Pcb downloader

      Originally posted by cableties
      Is it posible to upgrade firmware for adf or finisher without pcb downloader? Any input is apriecate tq in advance.

      on the imagePress6000/7000 use the USB Firmware

      other older iR's need PDL Downloader tool
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • spectraindo
          Trusted Tech

          250+ Posts
          • May 2008
          • 313
          #3
          Re: Pcb downloader

          Some ADF and Finisher from older machines (iR5000) uses EPROM for firmware storage.
          You can use an EPROM programmer for copying new firmware .
          Newer machines uses Flashroms and the only way is a downloader PCB.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: Pcb downloader

              Originally posted by cableties
              Is it posible to upgrade firmware for adf or finisher without pcb downloader? Any input is apriecate tq in advance.

              Downloader PCB (FY9-2034) online cost is about 250.00

              facebook/tweet post in your area to borrow one
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Previous template Next
                Working...