canon Ir c3200

[jake24482]

I am working on ir c3200. customer using heavy paper when we change heavy paper it make light copy . it makes perfect copy on plan paper setting .if we keep plan paper setting and use heavy paper after five or six pages it does not fuse properly .Is there any setting i can change to make it work

[mrfixit51]

Re: canon Ir c3200

Going out on a limb here, but this may have some results for you...

COPIER>ADJUST level 2 <HV-TR>

[teckat]

Re: canon Ir c3200

I am working on ir c3200. customer using heavy paper when we change heavy paper it make light copy . it makes perfect copy on plan paper setting .if we keep plan paper setting and use heavy paper after five or six pages it does not fuse properly .Is there any setting i can change to make it work

First do a dc con clear in service mode and input all label values, then you must perform a laser adjustment under service mode, <Function>Laser>L-ADJ-O>.
You must remove all drum kits prior to making this adjustment.
Then perform a CCD and full auto gradation.
Do the Auto Gradation for Heavy Paperand Plain Paper
If problem persists replace dc controller and re-install system software.

+++++you may also need to replace ITB Drive Motor M1

[yourownfree]

Re: canon Ir c3200

if you are printing from your computer use the manual tray as it should be, then select think paper on your computer on the driver. Then when you place the paper in the tray, tell it thick paper. If you are just copying, place the thick paper in the manual tray, its asks you the size and then it asks you the type, choose thick.

[teckat]

Re: canon Ir c3200

if you are printing from your computer use the manual tray as it should be, then select think paper on your computer on the driver. Then when you place the paper in the tray, tell it thick paper. If you are just copying, place the thick paper in the manual tray, its asks you the size and then it asks you the type, choose thick.

that has nothing to do with the issue



Stack Bypass = 64-253 gsm

Duplex = 64-209 gsm

i have customers who set up trays for Heavy with no issues at all