canon IR2018 adding toner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sjinachandran
    • May 2025

    #1

    canon IR2018 adding toner

    Dear friends,
    i have faced the problum of adding toner in ir2018, i cleaned the developer unit and replaced the new toner, machine works for 10 copies and it shows adding toner, some times machine works fine, where to analise.
  • zoraldinho
    teacher-guide-expert-guru

    Site Contributor
    5,000+ Posts
    • Mar 2008
    • 5001

    #2
    Re: canon IR2018 adding toner

    Read pdf.........ir2030-004.pdf
    If it ain't broke, don't fix it
    A picture is worth a thousand words

    Comment

    • gensys
      Trusted Tech

      250+ Posts
      • Jan 2011
      • 324

      #3
      Re: canon IR2018 adding toner

      Clear the sensor of dev.unit & Check the Gear Holder

      The Road will be Mastered by >>> the Going...

      Comment

      • gensys
        Trusted Tech

        250+ Posts
        • Jan 2011
        • 324

        #4
        Re: canon IR2018 adding toner

        Originally posted by zoraldinho
        Read pdf.........[ATTACH]11426[/ATTACH]
        Thanks for a Service Bulletin
        The Road will be Mastered by >>> the Going...

        Comment

        • sjinachandran

          #5
          Re: canon IR2018 adding toner

          Tku u for the reply friend, the problum occures due to shaft of the mac roller deformed, changed the roller and the problum fixed

          Comment

          • zoraldinho
            teacher-guide-expert-guru

            Site Contributor
            5,000+ Posts
            • Mar 2008
            • 5001

            #6
            Re: canon IR2018 adding toner

            Originally posted by sjinachandran
            Tku u for the reply friend, the problum occures due to shaft of the mac roller deformed, changed the roller and the problum fixed
            Roller???
            If it ain't broke, don't fix it
            A picture is worth a thousand words

            Comment

            Working...