NP 6512 - E001

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Smiley27
    Trusted Tech
    • Apr 2011
    • 160
    #1

    [Error Code] NP 6512 - E001

    Getting this error msg.

    History :
    Before this happend,scanner lamp scanned just to half of a4 and stoped..worked fine,but just for A5 lol ... I have no idea what could be cause of lamp to stop on half ...

    Can some1 tell me what thiis error means?

    and also,i cant get drum unit out,it seems to be stuck in there...
    Tags: dirty, drum, e001, error, half, lamp, msg, scan, scanned, scanner, scanner lamp, unit
    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387
      #2
      Re: NP 6512 - E001

      you need to get the developer out of the way first in order to remove the drum.
      The e001 code is a fixing temperature error. With this old beast it could be anything from weak heater in the film, to dirty thermistors or a power supply going bad. best bet is to look at film assembly to see if it needs replacing and then move on from there
      Accidents don't just happen. They must be carelessly planned.

        Comment

        • doktor
          Trusted Tech

          100+ Posts
          • Jan 2010
          • 214
          #3
          Re: NP 6512 - E001

          Try this.6512.pdf

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: NP 6512 - E001

              Originally posted by Smiley27
              Getting this error msg.

              History :
              Before this happend,scanner lamp scanned just to half of a4 and stoped..worked fine,but just for A5 lol ... I have no idea what could be cause of lamp to stop on half ...

              Can some1 tell me what thiis error means?

              and also,i cant get drum unit out,it seems to be stuck in there...


              did u have any type of voltage drop in the office/ or power loss/ during printing ?
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • gensys
                  Trusted Tech

                  250+ Posts
                  • Jan 2011
                  • 324
                  #5
                  The Road will be Mastered by >>> the Going...

                    Comment

                    • theBAU
                      Junior Member
                      • Mar 2010
                      • 8
                      #6
                      Re: NP 6512 - E001

                      Try to reset first this error(usually is from fixing ass'y) from the DC controller PCB.(Turn off the power switch, and short circuit JP103 and JP104 on the DC controller PCB)

                        Comment

                        • teckat
                          Field Supervisor

                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16083
                          #7
                          Re: NP 6512 - E001

                          Originally posted by theBAU
                          Try to reset first this error(usually is from fixing ass'y) from the DC controller PCB.(Turn off the power switch, and short circuit JP103 and JP104 on the DC controller PCB)
                          electric-shock.jpg
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            • Smiley27
                              Trusted Tech
                              • Apr 2011
                              • 160
                              #8
                              Re: NP 6512 - E001 UPDATED

                              I managed to reset error,and machine works fine NOT ... Next problem is,It does scan job and everything,no jam,but ! paper comes out blank! it probably has something to to with this drum unit that i cant get out .. i get out developer unit,and drum doesnt move,seems like its stuck in there .. btw,thanks for helping me solve first problem


                              also,any1have user manual part for this machine where you take drum unit out? lol i am curious ..
                              i take those 2 levers down,take out developer,and this shit doesnt move ...
                              Last edited by Smiley27; 09-02-2011, 07:47 AM.

                                Comment

                                • Smiley27
                                  Trusted Tech
                                  • Apr 2011
                                  • 160
                                  #9
                                  Re: NP 6512 - E001

                                  Managed to get it out, with combination of brain / force .. thing is,pc roller holder was broken,and it fell of and got stuck in machine lol .. i think thats good enough to make blank copys xD .. so,this time,i just need to replace drum unit


                                  thanks for your help guys


                                  consider thread as


                                  CLOSED

                                    Comment

                                    Previous template Next
                                    Working...