IR1600 bad copies on the front end

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • buttalasso
    • Jul 2025
    #1

    IR1600 bad copies on the front end

    Hi everybody, I had seen the machine in object that has a problem on the copy: every page has the front side with a several irregular black lines. I've stopped the paper between the fuser and the drum and the defect was just in the drum.
    I've checked the drum and the development, but I didn't seen anything abnormal.

    I suppose that it could be the drum.

    Is there anyone that could help me?

    Thank you in advance
    Tags: 600, bad, black, copies, drum, fuser, lines, paper, side
    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387
      #2
      Re: IR1600 bad copies on the front end

      sounds like you already answered your question. These small machines the drum life isn't that long
      Accidents don't just happen. They must be carelessly planned.

        Comment

        • buttalasso
          #3
          Re: IR1600 bad copies on the front end

          Originally posted by charm5496
          sounds like you already answered your question. These small machines the drum life isn't that long
          23k copies is enough for a drum?

            Comment

            • charm5496
              Service Manager

              Site Contributor
              1,000+ Posts
              • Apr 2008
              • 2387
              #4
              Re: IR1600 bad copies on the front end

              yes the drum is only rated for 21K
              Accidents don't just happen. They must be carelessly planned.

                Comment

                • heytheremrblue
                  #5
                  Re: IR1600 bad copies on the front end

                  Drum mate..............100%

                    Comment

                    • mrfixit51
                      Lead Service Technician

                      1,000+ Posts
                      • Oct 2008
                      • 1975
                      #6
                      Re: IR1600 bad copies on the front end

                      Look at the distance between the recurring marks. Create a cylinder that size in circumference, and it will usually lead you to the culprit. Also note that some developers seem to build up a deposit of toner that is deeper than the rest of the toner on the mag roller, and this will create recurring marks as well. Clean the mag roller off with a clean dry rag, and remove the toner buildup off of the mag roller...
                      "Once a King, always a King, but once a Knight is enough!"

                        Comment

                        • buttalasso
                          #7
                          Re: IR1600 bad copies on the front end

                          Originally posted by heytheremrblue
                          Drum mate..............100%
                          Originally posted by charm5496
                          yes the drum is only rated for 21K
                          Originally posted by mrfixit51
                          Look at the distance between the recurring marks. Create a cylinder that size in circumference, and it will usually lead you to the culprit. Also note that some developers seem to build up a deposit of toner that is deeper than the rest of the toner on the mag roller, and this will create recurring marks as well. Clean the mag roller off with a clean dry rag, and remove the toner buildup off of the mag roller...
                          Thank you everybody. The problem was fixed by the change of the drum

                            Comment

                            Previous template Next
                            Working...