[Misc] Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used. ???

[Simons]

I no longer can send fuser in for canon refurbishing. I need advice on what parts work and are needed to rebuild this series machine fuser unit.

Also if any other aftermarket sleeve on ebay for 170 bucks are worth using.

If just going with OEm parts what parts are needed? Just the usual upper, lower. lower bearings, ? What else? Are these similar to rebuild like the advance c5051? I have rebuilt those.

thanks!

[teckat]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

I no longer can send fuser in for canon refurbishing. I need advice on what parts work and are needed to rebuild this series machine fuser unit.

Also if any other aftermarket sleeve on ebay for 170 bucks are worth using.

If just going with OEm parts what parts are needed? Just the usual upper, lower. lower bearings, ? What else? Are these similar to rebuild like the advance c5051? I have rebuilt those.

thanks!

see this web site for refurb units--
http://www.epartsroom.com/FIXING-ASSEMBLY_FM2-9986-000

$369.00

[Simons]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

Ok thanks, and is anyone rebuilding them...have anything to add?

[teckat]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

Ok thanks, and is anyone rebuilding them...have anything to add?

not that I know of/
if u have time>space>& patience >i bid u peace

u can call KATUN-
http://www.katun.com/resources/rebuild-instructions/

http://www.katun.com/resourcedocumen...-instructions/
see this PDF--------iR3380 Fusing Rebuild.pdf

[Simons]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

Anyone else rebuilding these?

[teckat]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

Anyone else rebuilding these?

not that I can find/ have talked to many a tech.

unless u have a contact/friend > with/in an authorized CANON dealer

[Simons]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

totally unexpected! , With the Advance design being a shop rebuild that is easy, why not rebuild these. They are very similar and look easy to do.

[teckat]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

totally unexpected! , With the Advance design being a shop rebuild that is easy, why not rebuild these. They are very similar and look easy to do.

all about tech time,inventory/turnaround time & money

[charm5496]

Re: Canon irc2880 irc3380 irc2550 Fuser rebuild parts sources advice and parts used.

We rebuild these on site in The UK, piece of cake, I carry the fixing film ass'y as car stock, doesn't take much longer to replace than the old IR22770 series.

But only use the guenuine canon fixing film ass'y.

Same here. We replace the films in about 20 minutes in and out. And the pressure roller gets replaced with every other film assembly when the meter count gets high. Saves a ton of money and space in the car for parts.