[Misc] Too mauch toner while printing

[Sahdy]

There is too much toer when printing only.
Canon IR 6000n
by the way it was also in coping but i solved it by reducing Copy Dens from 5 to 2 (Copier - Adjust - Dens).
but don't know how to reduce toner on the letter of the words on the printed paper it's too much now.
thanks.

[teckat]

Re: Too mauch toner while printing

There is too much toer when printing only.
Canon IR 6000n
by the way it was also in coping but i solved it by reducing Copy Dens from 5 to 2 (Copier - Adjust - Dens).
but don't know how to reduce toner on the letter of the words on the printed paper it's too much now.
thanks.

One word "CALIBRATION" when was the last time ????

do u have a Fiery imagePASS L1 connected/ if so run your calibration from it

Have u the latest print drivers ??

[Sahdy]

Re: Too mauch toner while printing

One word "CALIBRATION" when was the last time ????

do u have a Fiery imagePASS L1 connected/ if so run your calibration from it

Have u the latest print drivers ??

How do i know imagePASS L1 is connected or not?

Cloud you mention the latest print driver for me to download it.

thaks so much.

[teckat]

Re: Too mauch toner while printing

How do i know imagePASS L1 is connected or not?

Cloud you mention the latest print driver for me to download it.

thaks so much.

sorry, I just now see u have a iR6000n / that means u don't have a Fiery connected/ u have a Printer Kit Network Multi-PDL Printer Kit-A2 installed

are u a tech ??
if not have your IT Person check or install latest drivers-

here is the link for the latest drivers
Canon U.S.A. : Support & Drivers : imageRUNNER 6000

[COPIERTEC ASSOCIATES]

Re: Too mauch toner while printing

I had similar experience some time and did the following with good results:Go to COPIER>ADJUST>DEVELOP>BIAS.Increase setting of Bias from say 180>220 likewise adjust the values for HVT-DE to any value to + or- as you test on both copying and printing.

[teckat]

Re: Too mauch toner while printing

I had similar experience some time and did the following with good results:Go to COPIER>ADJUST>DEVELOP>BIAS.Increase setting of Bias from say 180>220 likewise adjust the values for HVT-DE to any value to + or- as you test on both copying and printing.

all of those nonsense settings mean nothing if u don't follow a "CALIBRATION" schedule

[Sahdy]

Re: Too mauch toner while printing

I installed the PCL5e-c_6_v8.80_v6.80 , think it the latest. Still the same proplem.

pls note: the machine is ir 6000dn not B/W not a colour.
so how to CALIBRATE

[teckat]

Re: Too mauch toner while printing

I installed the PCL5e-c_6_v8.80_v6.80 , think it the latest. Still the same proplem.

pls note: the machine is ir 6000dn not B/W not a colour.
so how to CALIBRATE

iR6000dn is a B&W/ no kidding

[COPIERTEC ASSOCIATES]

Re: Too mauch toner while printing

Can teckat assist me to illustrate how calibration is done in b&w ir6000dn coz i have never done the same before.And as earlier on said when i tried COPIER>ADJUST>DEVELOP,with success am abit puzzled thanx.

[vigour]

Re: Too mauch toner while printing

you should check if your door specs are correctly entered.
someone might have been playing with some values.

1 look around under additional functions > printing, there is something there, maybe printing quality >toner save.

2 from the PCL driver, go to printing properties >printing preferences> quality, then select an objective,
click details, then you will see a choice to turn on toner save.

the other drivers are slightly different.

[Sahdy]

Re: Too mauch toner while printing

you should check if your door specs are correctly entered.
someone might have been playing with some values.

1 look around under additional functions > printing, there is something there, maybe printing quality >toner save.

2 from the PCL driver, go to printing properties >printing preferences> quality, then select an objective,
click details, then you will see a choice to turn on toner save.

the other drivers are slightly different.

Good but this way save too much (the printed paper is nearly faint). aren't there a way between?
thanks

[teckat]

Re: Too mauch toner while printing

Good but this way save too much (the printed paper is nearly faint). aren't there a way between?
thanks

post a picture of a glass copy
& post a picture of a network print

[vigour]

Re: Too mauch toner while printing

what makes you think there is too much toner?
did you use a test canon sheet?
I think your copies are normal, but you are not used to seeing good quality prinnt.

[Sahdy]

Re: Too mauch toner while printing

post a picture of a glass copy
& post a picture of a network print

attached is printed test page then copy of it from the machine copy glass.
i feel the toner is very bulge in the printed (with my hand).

[teckat]

Re: Too mauch toner while printing

OPTICS