[Jamming] IR-3235 ADF reading jams ERR E0413

[megtech]

I have an IR-3235i that has been jamming in the ADF and in some cases reads jam after all pages have passed through - becuase it is not detecting that it picked up the last sheet from the stack. If you only copy a single sheet a time, the ADF works as you would expect it to. From the best of what I can tell the problem is either with the home sensor or the shift motor. I am receiving ERR e0413. When I look in the jam log is am getting a code of 3 (most of the time); along with 4,73,95,92 and 45. I cannot find any committed info to this error message. I have also put a post in the Service Manual Forum to see if I am able to see a service manual for this device.

Any help is appreciated.
Thanks,
MegTech

[teckat]

Re: IR-3235 ADF reading jams ERR E0413

I have an IR-3235i that has been jamming in the ADF and in some cases reads jam after all pages have passed through - becuase it is not detecting that it picked up the last sheet from the stack. If you only copy a single sheet a time, the ADF works as you would expect it to. From the best of what I can tell the problem is either with the home sensor or the shift motor. I am receiving ERR e0413. When I look in the jam log is am getting a code of 3 (most of the time); along with 4,73,95,92 and 45. I cannot find any committed info to this error message. I have also put a post in the Service Manual Forum to see if I am able to see a service manual for this device.

Any help is appreciated.
Thanks,
MegTech

Through the ADF an error E413-0001 will display intermittently.
This error would not appear during copying.
Printer Main Controller
--------------------------------------------------
check this also
DRIVE ASSEMBLY (ADF model)
Also check if CLIP is missing ,will caused this error code.
The clip is item #1 and shown with an arrow FC5-4425-000
clip.jpg

[megtech]

Re: IR-3235 ADF reading jams ERR E0413

I will check this next week and reply. Thank you for your response.

[zoraldinho]

Re: IR-3235 ADF reading jams ERR E0413

New Action to be taken at occurrence of pickup jam (jam code 0003) just for prevention

ir4570-095.pdf

[megtech]

Re: IR-3235 ADF reading jams ERR E0413

Thanks for the PDF. This makes the most sense for what I am seeing. I am looking into those replacment parts and their cost.

[zoraldinho]

Re: IR-3235 ADF reading jams ERR E0413

images2.jpgimages2.jpg

[teckat]

Re: IR-3235 ADF reading jams ERR E0413

Thanks for the PDF. This makes the most sense for what I am seeing. I am looking into those replacment parts and their cost.

that Pub is for jam 0003 and not the ERROR CODE U POSTED E0413



Check your DADF SER.NUMBER before u spend money, these updates may already be in


Affected machines:
<ADF>
DADF-U1 INCH/A : DDN20869 and later
DADF-U1 A : DDP06996 and later
DADF-U1 INCH/AB/K : DDW16084 and later

<Copier>
iR3245 120V US : DHJ04749 and later
iR3245I 120V US : DHK06641 and later
iR3235 120V US : DFW07624 and later
iR3235I 120V US : DGA12173 and later
iR3245N 230V EU : DHM06936 and later
iR3235N 230V EU : DGJ10201 and later
iR3225N 230V EU : DFK18396 and later
iR3245 230V AU : DHP01048 and later
iR3235 230V AU : DGY00874 and later
iR3245 120V : DQA00587 and later
iR3235 120V : DPZ00686 and later
iR3225 120V : DPW00778 and later
iR3230 120V : DPY(Next production is undecided)

[teckat]

Re: IR-3235 ADF reading jams ERR E0413

New Action to be taken at occurrence of pickup jam (jam code 0003) just for prevention

[ATTACH]12318[/ATTACH]

Reminder >>> that the poster listed a ADF use ERR e0413 and not a jam code 0003

your info pub on 0003 jam is great

[Simons]

Re: IR-3235 ADF reading jams ERR E0413

I was wondering if anyone had anything else to say about this error since it is or could be a big pain. I had a 3235 pull this even though it has the updated feeder parts in it brand new I might add. Could the error be cause by operator error? I did just add the very latest white separation pad. Now I get to see if the 413-001 comes back. Better not, I got all updated parts in, don't need a controller problem. Anything to add?

[canonbundy]

Re: IR-3235 ADF reading jams ERR E0413

I have an IR-3235i that has been jamming in the ADF and in some cases reads jam after all pages have passed through - becuase it is not detecting that it picked up the last sheet from the stack. If you only copy a single sheet a time, the ADF works as you would expect it to. From the best of what I can tell the problem is either with the home sensor or the shift motor. I am receiving ERR e0413. When I look in the jam log is am getting a code of 3 (most of the time); along with 4,73,95,92 and 45. I cannot find any committed info to this error message. I have also put a post in the Service Manual Forum to see if I am able to see a service manual for this device.

Any help is appreciated.
Thanks,
MegTech

There is a TB on this problem and it is a simple realignment of the Doc Detect Sensor PLATE - bend OOPS, I mean realign the Plate 1 - 2mm either way and test.

[Simons]

Re: IR-3235 ADF reading jams ERR E0413

Great if anyone has the tech pub I could really use it. thanks!