Canon IR 5000 bypass noise

[bobthecopierman]

IR 5000. When paper goes to feed from bypass it makes a loud grinding noise and doesnt pick up the paper.
Sounds like 2 rubber rollers mashing together. Any ideas what might be causing this?

[songela]

Re: Canon IR 5000 bypass noise

Find if the release solenoid is operating properly

[Toby]

Re: Canon IR 5000 bypass noise

It is sometimes caused by the bypass clutch or bearing hat sets the bypass clutch,

[teckat]

Re: Canon IR 5000 bypass noise

IR 5000. When paper goes to feed from bypass it makes a loud grinding noise and doesnt pick up the paper.
Sounds like 2 rubber rollers mashing together. Any ideas what might be causing this?

Manual Feed Clutch (CL3) in
Pre-registration Drive Assembly

M2 ?

[Toby]

Re: Canon IR 5000 bypass noise

Manual Feed Clutch (CL3) in
Pre-registration Drive Assembly

M2 ?

Without looking in the parts book, I believe it is CL3 directly behind the system box.
I will check the location, the bearing that sits it in place usually is bad.