454 results in 0.0611 seconds.
-
Bizhub C759 jam 66-05
I have a Bizhub C759 that is jamming 66-05 in the adf. I have managed to get it to not jam for normal paper but the customer is scanning that horrendously... -
FN27N trouble
Hello,
We have a FN27N that prints the document but hangs in the middle. I have added a picture below. Every time i print the spring pops... -
Does anyone know where I can get a parts guide and parts for this machine. All I need is Tray 1 feed rollers and length paper guide. The guide is broken... -
m602 13.A2.D2
I believe I have exhausted the things to check on this error. Trying to see if there's anything else I have missed. The rollers are good. The small gear... -
MP C305SPF with problems (unsurprisingly) mostly white voids/stripes
Hello, I'll preface this post by saying that I'm not a copy machine tech. So I recently acquired a lower count c305, when I got it, most of the toners... -
Altalink C8055 dadf jam 305-197
It will feed a stack of 70-80 docs SEF, no problem. When I try a single LEF doc, it jams with fault 305-197 'Prohibit Combine Size Jam'. I've cleaned... -
PF-3100 Jamming
I have a customer who states there is a lot of jamming with two of these Bulk Feeders [PF-3100] for a couple of P3260's. I went to replace the rollers... -
General question 2 all technicians or users - which was the best digital copier IYO?
I have sometimes wondered about the constant churning out of new machines and models to feed the bottom line and am also aware that 'newer' doesn't always... -
Where does this small spring on a Konica C253 (changing rollers on tray 2 & 3 ) go?
Hi,
My first post here!
I have a Konica bizhub C253 and I was changing the orange pickup rollers for trays 2 and 3. After finishing... -
Konica C4070 GBC PUNCH G2 issue
Good afternoon knowledgeable people, I have a Konica C4070 with the G2 Punch as an option using a surelock punch die, it refuses to punch straight and... -
FK-6306 B FUSER KIT Pick Off Finger Part Number
Does anyone know the part number for the pick off finger in a FK-6306 B FUSER KIT?
I have found heat rollers and press rollers and it doesn't... -
MP7503 Paper Feed Rollers
Hello everyone,
The paper feed rollers of MP7503 are wearing out after approximately 100,000 prints, whereas the expected target is 1 million... -
Scanjet Enterprice Flow 7000 S3
Hello:
Could anyone please help me with this problem.
I just replace all rollers.
Thanks for your help.... -
Lexmark XM3250 DF multisheet feed
We're a small dealership with a limited amount of these machines out. Lexmark's tech support is absolutely terrible. Has anyone out there figured out... -
Booklet fin W1 Pro
Hi,
Have the above finisher on a VP115, just shy of a million clicks. When stapling on top left corner intermittently and usually the...
Leave a comment: