big mike
Trusted Tech
Last Activity: 1 week ago
Joined: 09-11-2012
Location: arlington, tx
-
I have a parts fuser for the C8070, swapped the boards and it works. Thanks! -
I removed the cover. It has a pwb like the C8045 and C8070 fusers. Do you think it's the 220v version for a C8045?Leave a comment:
-
Thank you, I will check it.Leave a comment:
-
fuser for C8045 or C8070
I received a fuser with part number 126K38221, can't find the model it will work on. It looks like the Altalink fusers. It doesn't work on the C8045 or... -
On my D95, I set up 'baseline adjustments' and it seemed to work so far. I set 752-006 to 500. It is 413 on the factory nvm sheet. It detoned, runs clean...Leave a comment:
-
D125 runs dark
I was surprised how quickly the exhaust filter gets dirty. It has a total of 889k on it. The target density 752-006 = 339. I believe the default is 413.... -
Thanks for responding. I understand that the WorkCentre® 7525, 7530, 7535, 7830, 7835 fuser is one part number. The WC-7545, 7556, 7845, 7855 is a different...Leave a comment:
-
Altalink 7545
I replaced the fuser on a 7545. What's the difference between the slower fusers and the faster (7545/55) ones? Can I swap out the chip/board on them.to... -
Thanks for the reply. That makes sense. At this point, I believe they will scrap the copier....Leave a comment:
-
Good idea, will try it and let you know. Yesterday, I reseated the boards, replaced the hard drive and there wasn't any change.Leave a comment:
No activity results to display
Leave a comment: