fuser for C8045 or C8070

[big mike]

I received a fuser with part number 126K38221, can't find the model it will work on. It looks like the Altalink fusers. It doesn't work on the C8045 or C8070 (I know they are different speeds/models). When I put it in them I get the same fault, 310-381 illegal/wrong fuser.

[shinchan]

I received a fuser with part number 126K38221, can't find the model it will work on. It looks like the Altalink fusers. It doesn't work on the C8045 or C8070 (I know they are different speeds/models). When I put it in them I get the same fault, 310-381 illegal/wrong fuser.

i checked my fuser for fuji xerox starts with 126k ... so it could be for 220v/ fuji xerox machine.

but it could be for lower speed models.

altalink C8030, speed 30-35....

they are using exactly same fuser unit, but there is a small pwb on fuser unit altalink C8045
open the front cover of fuser unit, 3 screws Torx security T10 if i remembered correctly.
the small pwb is on the left hand side

speed 30-35 - fuser unit without pwb
speed 40-55 - fuser unit must use the pwb

[big mike]

Thank you, I will check it.

[big mike]

I removed the cover. It has a pwb like the C8045 and C8070 fusers. Do you think it's the 220v version for a C8045?

[big mike]

I have a parts fuser for the C8070, swapped the boards and it works. Thanks!