I formated my canon GP225 hard

[medo2000k]

Re: I formated my canon GP225 hard

Hi,

As advise from teckat, factory default would allow all settings to be reset and it will request a hard switch reboot. After the reboot, you would be able to select English.

But since in your 1st post, you had perform a format, then you are correct that you need the software known as PDL DownLoader to install back the printer firmware that you had formatted. Best that you get authorised Canon tech to look at your problem.

Hello brother
i hope that i meet you in person oneday to thank you so if you plane to visit Egypt you have to tell me i promise you that you will have a nice time here.
thanx so much.
anyone here come to Egypt i'll invite him to a special trip

my no is 00201003821333

Egypt
El Menofia - Tala
Om El Abtal Street
Ahmed Abo El MKarim

جمهورية مصر العربية
محافظة المنوفية
مدينة تلا
شارع مدرسة أم الأبطال
أحمد على أبو المكارم

[KL568]

Re: I formated my canon GP225 hard

thanx so much got it now it is working.
it is realy good to find all this people here to help others.
i hope that all of members here find solutions to thier problems and i hope that i can help anyone.
with all my best wishes.
have a nice time

Guess each of us here are just contributing whatever that is known from experience. At least, this would build up this forum's KB, albeit you really need to search around for it, plus if you would not mind bearing some hard comments being pass around while you digging around for it.