Canon Ir 3035

[jose1020]

Help with Error code e000-0001 I replaced 3 fuser units, updated software, replaced ac drive PCB. Im still getting the error code. Any ideas what else could be

[charm5496]

Re: Canon Ir 3035

Main Power Supply Assembly is FM2-0260-000 could be an issue. Did you replace just the AC driver portion of the power supply?
Another issue could be the latch on the right door.

[jose1020]

Re: Canon Ir 3035

Main power supply pcb

[teckat]

Re: Canon Ir 3035

Help with Error code e000-0001 I replaced 3 fuser units, updated software, replaced ac drive PCB. Im still getting the error code. Any ideas what else could be

Common symptom is that the latch can catch when opening the Main Right Side Door, this can be remedied by adjusting the cover that can interfere with the fuser release (1 screw ) (this cover is added when installing the internal finisher). The common mistake in the field is to bend this latch instead of adjusting the cover.

Problem is that the latch that releases and applies pressure to the fixing filmmay have been bent causing this mechanism to work erratically (proper and improper pressure when the Main Right side door was closed ).

Replace the latch which is formally called the Hook Holder Unit;
Part # FM2-0355-000