[Misc] Need Colour Copier

[Mrigen]

I am looking for a used canon colour copier.I saw d machine IR3220 so please suggest what should i do about d machine or please recommend which model is the best of that range.

[iRC]

Re: Need Colour Copier

iRC3220 ain't that bad option, but I'd choose a device from the iRC2380-3580 range. Those devices are real workhorses; we have few of them with over 600k in meter, and they are still running with original fusers etc. Much more worry-free device than iRC3220 or 3200.

[Max]

Re: Need Colour Copier

Personaly if i had to spend my own money i would go for ricoh

[charm5496]

Re: Need Colour Copier

iRC3220 ain't that bad option, but I'd choose a device from the iRC2380-3580 range. Those devices are real workhorses; we have few of them with over 600k in meter, and they are still running with original fusers etc. Much more worry-free device than iRC3220 or 3200.

both the 3220 series and 3480 series machines are good devices. From a repair point of view I like the 3220 series and the print quality is better than 3480 series. If you have the extra money a 5180 series is just as easy to work on as well, but the fuser assembly is a little costly, but a real work horse. We have several of these in the 2.5 - 3 million range.

[teckat]

Re: Need Colour Copier

I am looking for a used canon colour copier.I saw d machine IR3220 so please suggest what should i do about d machine or please recommend which model is the best of that range.

iR3220

LOOK FOR A LOW VOLUME ONE

[Mrigen]

Re: Need Colour Copier

Thank u all for u r good suggestions. I think now i have a choice for ir5180.

[teckat]

Re: Need Colour Copier

Thank u all for u r good suggestions. I think now i have a choice for ir5180.

u better make sure the fuser unit has been replaced recently / ask for paperwork on it-

these units can cost between 800.00/1,200 US dollars to replace- there is no rebuilding these in the field anymore

[Mrigen]

Re: Need Colour Copier

u better make sure the fuser unit has been replaced recently / ask for paperwork on it-

these units can cost between 800.00/1,200 US dollars to replace- there is no rebuilding these in the field anymore

Is there any way to know how many paperwork done the fuser unit ?????

[teckat]

Re: Need Colour Copier

First --Get yourself a 5180 service manual
Next---u need to check if 5180 has latest firmware -
Run some PG 10's test prints- to inspect for Fix unit surface wear or damage-
check error log for E007 codes> if not cleared already
FUSER.JPGpicture of new unit/
could check counter in service mode

SERVICE MODE
press *Additional Functions Key (once)
press #2 & 8 key at the same time (release both)
then press *Additional Functions Key again (release it)

the service mode is for experience tech's/
u can cause issues & problems if not familiar with it

COPIER > COUNTER > DRBL-1 > FIX-BLT-U
COPIER > COUNTER > DRBL-1 > FIX-BLT-L

you should not clear these counters unless u replace entire unit/
a third party or fourth party may have done so for sales purpose


if u ever need to replace a Fix unit > u need to run this adjustment
Enter the Service mode--only run this when replacing a unit
COPIER > FUNCTION > FIXING > FX-UHP-S > OK
--Check that 'FX-UHP-S is OK (It will take for about 3 minutes.)

Then Select COPIER > FUNCTION > FIXING > FX-LHP-S > OK
--Check that 'FX- LHP -S is OK (It will take for about 5 minutes.)