I'm stumped...imagerunner 5075 e224-0001

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • butitsmyfirstday
    Technician

    50+ Posts
    • Feb 2011
    • 60

    #1

    I'm stumped...imagerunner 5075 e224-0001

    So far I've replaced DADF cables, DADF assembly & the controller assembly that the cables connect to... code still re-occurs whenever I attempt to make a copy off the glass or through DADF test prints from service mode come out just fine.

    Any ideas are welcome...thanks in advance
  • zoraldinho
    teacher-guide-expert-guru

    Site Contributor
    2,500+ Posts
    • Mar 2008
    • 4999

    #2
    Re: I'm stumped...imagerunner 5075 e224-0001

    Problem is not in ADF but in reader unit i guess?
    If it ain't broke, don't fix it
    A picture is worth a thousand words

    Comment

    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083

      #3
      Re: I'm stumped...imagerunner 5075 e224-0001

      Originally posted by butitsmyfirstday
      So far I've replaced DADF cables, DADF assembly & the controller assembly that the cables connect to... code still re-occurs whenever I attempt to make a copy off the glass or through DADF test prints from service mode come out just fine.

      Any ideas are welcome...thanks in advance
      never seen a e224 code on this model
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      • HELIO240
        Trusted Tech
        • Jan 2011
        • 137

        #4
        Re: I'm stumped...imagerunner 5075 e224-0001

        Originally posted by butitsmyfirstday
        So far I've replaced DADF cables, DADF assembly & the controller assembly that the cables connect to... code still re-occurs whenever I attempt to make a copy off the glass or through DADF test prints from service mode come out just fine.

        Any ideas are welcome...thanks in advance
        hello've got a similar error in the IR5055 and was the original glass with ground fault, after correcting the grounding of the same work in my case the error was constant ..

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083

          #5
          Re: I'm stumped...imagerunner 5075 e224-0001

          Originally posted by HELIO240
          hello've got a similar error in the IR5055 and was the original glass with ground fault, after correcting the grounding of the same work in my case the error was constant ..


          show me that code on paper
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

          Comment

          Working...