Registration problem on IPRC.7010VP

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • twinax
    Technician

    50+ Posts
    • Feb 2008
    • 82
    #1

    [CQ] Registration problem on IPRC.7010VP

    Hello Guys,

    On IPRC 7010VP counter (102) = 1 000 000 prints we have a registration problem, in feed direction.

    Image is moved around 15 mm without any error code.

    All sensors involved have been cleaned, checked ...

    ITB belt replaced.

    This problem is not permanent only sometimes on set (10%).

    Any idea ?

    Thanks for your help.

    Regards,
    Remember Murphy's Law.
    Tags: 7010vp, belt, code, counter, error, feed, prints, registration, set
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5007
      #2
      Re: Registration problem on IPRC.7010VP

      Binder1.pdf
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • twinax
          Technician

          50+ Posts
          • Feb 2008
          • 82
          #3
          Re: Registration problem on IPRC.7010VP

          Hi,

          This problem has been solved by replacement of all bearings into synchronisation module.

          regards,

          Twinax
          Remember Murphy's Law.

            Comment

            Previous template Next
            Working...