[Misc] canon ir 2022

[Saji]

Canon ir 2022 showing Set correct paper size, after one or two copies,( Paper selector is ok.) once off and on machine make one or two copy again, then it start shows set correct paper size again.both cassettes gives the same problom..please help me to solve it,

thanks in advance.

[Gerhard]

Re: canon ir 2022

Hi

You must check the vertical path and registraion areas. Youve probably got a sensor thats getting stuck and reading the wrong paper length. Hope this helps!!

Regards

[mramlawi]

Re: canon ir 2022

hello
it happend so many times with me in Canon IR 2018 \
its the unit feed problem you must disassemble it and check if the solonid works fine put some lubricates,if didnt work replace the unit
waitin ur reply

[teckat]

Re: canon ir 2022

Canon ir 2022 showing Set correct paper size, after one or two copies,( Paper selector is ok.) once off and on machine make one or two copy again, then it start shows set correct paper size again.both cassettes gives the same problom..please help me to solve it,

thanks in advance.

add an extra wrap to the spring for the Registration Sensor (SR209) flag should resolve the issue


CASSETTE FEEDER ASSEMBLY
or check/replace >> Size Detection Assy.
size.JPG

[Saji]

Re: canon ir 2022

An extra wrap to to Registration sensor activator spring solved the problom, as suggested as Sir teckat.thanks to all, specially to sir Teckat.

[teckat]

Re: canon ir 2022

An extra wrap to to Registration sensor activator spring solved the problom, as suggested as Sir teckat.thanks to all, specially to sir Teckat.

The Dude.jpg


THANKS,

[Rakesh]

Re: canon ir 2022

thanks..

[mramlawi]

Re: canon ir 2022

[ATTACH=CONFIG]13297[/ATTACH]


THANKS,

thanks also it works with me