canon ir 2525

[Saji]

Canon ior 2525 Displaying E000. machine was working untill we replaced the defective fuser film.tried to reset, but to no avail, checked the heater , fuser , wiring etc, every thing seems fine, wht could be the problom, i am missing something? please help me. thnaks in advance.

[mramlawi]

Re: canon ir 2525

man

try to reset it again cos there a way to reset it deferent from canon ir2018

[teckat]

Re: canon ir 2525

Canon ior 2525 Displaying E000. machine was working untill we replaced the defective fuser film.tried to reset, but to no avail, checked the heater , fuser , wiring etc, every thing seems fine, wht could be the problom, i am missing something? please help me. thnaks in advance.

imageRUNNER 2545 / 2545i / 2535i / 2535 / 2530 / 2525

To clear the error in Service Mode :
ADDITIONAL FUNCTIONS>2 KEY>8 KEY> ADDITIONAL FUNCTIONS>#CLEAR>ENGINE>ERRCLR.

Make sure to select>ENGINE>CLEAR

Note: This mode should be used to clear all Fixing related Error Codes.
In this series-------------------


Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
#SSSW will be displayed.
Use the right arrow and scroll to #CLEAR then press OK. Use the right arrow and scroll to ENGINE then press OK. ERRCLR will be displayed then press OK.
Then power cycle the machine.

[Saji]

Re: canon ir 2525

Thank you .