Canon CLC3220

[mramlawi]

Dear Friends ,
i have an error code on Clc3220 E020-280/1 ??? what this code mean ? anyone face this b4 ?


thanks alot

[teckat]

Re: Canon CLC3220

Why don't u buy a Manual to study on this series ??

HAVE U REPLACED THE MAGENTA DRUM

E020 There is a fault associated with the drum/developer.
first 2 digits of detail code
xx=01: Y
xx=02: M
xx=03: C
xx=04: Bk


x80=The actual value is considerably high in relation to the ITB surface reflectance when a new
drum unit is fitted. The SALT sensor is faulty.
The fault occurs while ATR control is being executed.

xx81=The actual value is considerably high in relation to the ITB surface reflectance when a new
drum is fitted.
The fault occurs while ATR control is being executed.

[mramlawi]

Re: Canon CLC3220

thanks man alot i have already have the manual but im askin to know if some one get this error befor i already changed the M Drum and after 1 month got the same error code . thanks anyway

[teckat]

Re: Canon CLC3220

thanks man alot i have already have the manual but im askin to know if some one get this error befor i already changed the M Drum and after 1 month got the same error code . thanks anyway

E020 are common codes in this printer/ u need follow a maintenance procedure on these models/
which means u remove all units(fuser-duplex-ITB-cleaning blade-Drums-toner-MF-Salt sensor/ and clean interior/inspect those units & clean/ remove ITB sheet>clean interior>clean ITB rollers

worked on thousands of these 3200 series models, I never just pop a drum in on a E020, u will learn


it's all about learning the copy process on these models-
"what takes place and when it takes place"

[mramlawi]

Re: Canon CLC3220

I like your advice man but where is the Salt sensor locate ? i can see the sensor which loacted up the ITB on the Right of the machine is this what do u mean ?sorry if i misunderstand

thanks again

[teckat]

Re: Canon CLC3220

I like your advice man but where is the Salt sensor locate ? i can see the sensor which loacted up the ITB on the Right of the machine is this what do u mean ?sorry if i misunderstand

thanks again

make sure when removed-to clean>u re-seat properly > see manual
SALT Sensor inside the= "Pattern Reading Unit" also includes the auto registration sensor PCB
PATCH READ.JPG

SALT SENSOR.JPG
SALT-Dhalf control mechanism is used to stabilize the gradation of images on the ITB. It makes up for the changes in gradation characteristics that occur in response to the deterioration in developer or photopositive drum, changes in temperature/humidity, and changes that occur as the machine is used over time.

[mramlawi]

Re: Canon CLC3220

thanks man yea that's what i meant i change it before 1 month and the problem come back ...

[teckat]

Re: Canon CLC3220

thanks man yea that's what i meant i change it before 1 month and the problem come back ...

u will learn to realize>
"Life is not all that Fair with imageRunners"



all printers & their environments are different / unless someone here can transport themselves physically to your location to actually evaluate the situation, you're on your own.

mind-reader real.jpg timetravel.gif

[mramlawi]

Re: Canon CLC3220

[QUOTE=teckat;264468]
u will learn to realize>
"Life is not all that Fair with imageRunners"



all printers & their environments are different / unless someone here can transport themselves physically to your location to actually evaluate the situation, you're on your own.




thanks anyway