Canon ir5570 E0014

[hamdyyassin]

I haev e0014 in my copier ir5570 .
I replace the heater motor , the dc controllrer and cheak all connectors.
please i need help,thanks.

[zoraldinho]

Re: Canon ir5570 E0014

Check if you can smoothly turn rollers by hand.Probably just need to repair fix assy.

[charm5496]

Re: Canon ir5570 E0014

Check if you can smoothly turn rollers by hand.Probably just need to repair fix assy.

I agree. Did you pull the fuser apart and inspect the rollers, bearings and shutter assembly. What shape are the gears in?

[teckat]

Re: Canon ir5570 E0014

I haev e0014 in my copier ir5570 .
I replace the heater motor , the dc controllrer and cheak all connectors.
please i need help,thanks.

Check front door interlock switch (SW2)>>>>check harness & switch magnet adjustment.

Lower Fuser roller bearings are XG9-0636-000.

[COPIERTEC ASSOCIATES]

Re: Canon ir5570 E0014

Charm and Teckat are spot on. Had similar problem and changed lower press roller bearings and problem solved.

[costd]

Re: Canon ir5570 E0014

Your milage may vary - even with the new bearings and following the TP, some units still had the same issue. Canon then released a pressure roller unit that had bearings pre-installed (FM2-4683). For us, that has resolved the issue of early bearing wearout.

[vigour]

Re: Canon ir5570 E0014

Check if you can smoothly turn rollers by hand.Probably just need to repair fix assy.

Look for a cracked gear.

[charm5496]

Re: Canon ir5570 E0014

Your milage may vary - even with the new bearings and following the TP, some units still had the same issue. Canon then released a pressure roller unit that had bearings pre-installed (FM2-4683). For us, that has resolved the issue of early bearing wearout.

yes the roller with the bearings pressed on has been very effective