[CQ] PRINTING IS OVERLAPPED

[edwin]

When we print in canon ir 3300 macine usually the print in over lapped in the third line and fourth of the text. Plz suggest to solve this problem.

[Matoku]

Re: PRINTING IS OVERLAPPED

Hi,
it easier to help if you attach the copy sample.

[edwin]

Re: PRINTING IS OVERLAPPED

here with i have attached the file

[Van Steal]

Re: PRINTING IS OVERLAPPED

looks like you got some paper jam in the printer. Dont work on these printer but check around transfer belt if it has one

[blazebusiness]

Re: PRINTING IS OVERLAPPED

here with i have attached the file

no transfer belt on this model. If a copy made from the glass and a copy made using the dadf and prints all have the problem you can eliminate the scanner and continue diagnosis in main unit. Stop a copy in progress to see image on paper before it reaches the fuser. If copy ok-----inspect fuser. If not then your possibilities are drum , developer , or even the laser.

[Matoku]

Re: PRINTING IS OVERLAPPED

Hi, You Check the drum edge (inner Side), check the coupling slot in there. sometime it broke can cause this problem.

[Brian8506]

Re: PRINTING IS OVERLAPPED

How many copies on machine? If thats 2 lines squeezed together, clean and check reg roller. Had a similar problem last week on 3320 with 1.3m and reg roller was slick.