wave paper on GP 335

[Guest]

my canon GP 335 made wave pages after the passage on the fixing systems,
if the copy style is on R/V the page block before entering the fixing systems for the second passage, cause of the waves.

[blazebusiness]

Re: wave paper on GP 335

my canon GP 335 made wave pages after the passage on the fixing systems,
if the copy style is on R/V the page block before entering the fixing systems for the second passage, cause of the waves.

If you are describing a curl in the paper after fixing which makes it jam when refeeding thru machine for a second pass (duplexing)..inspect fuser for flat spots on lower roller & check nip width. If what you are describing is a lot or wavy wrinkles that occur as paper leaves the machine your problem will be in the exit door assembly. Wrinkled/wavy copies coming out of the ir 330 / Gp 335 mean the exit rollers need replacement. Very common problem on this model.

[salah]

Re: wave paper on GP 335

thanks, i ll try.

[charm5496]

Re: wave paper on GP 335

If you are describing a curl in the paper after fixing which makes it jam when refeeding thru machine for a second pass (duplexing)..inspect fuser for flat spots on lower roller & check nip width. If what you are describing is a lot or wavy wrinkles that occur as paper leaves the machine your problem will be in the exit door assembly. Wrinkled copies coming out of the ir 330 / Gp 335 mean the exit rollers need replacement. Very common problem on this model.

couldn't have described this solution any better!!!

[blazebusiness]

Re: wave paper on GP 335

couldn't have described this solution any better!!!

Thanks for the encouragement my friend.....appreciate the compliment and have really enjoyed and learned a lot from your posts also!

[mramlawi]

Re: wave paper on GP 335

some times Paper Wet make the problem so trouble shoot your problem at one side is there any Paper wrinkled ?

[salah]

Re: wave paper on GP 335

at one side every think is normal.
except some curl or waves at lhe end of the paper
but when duplexin the curl at the end of the page stop the paper to enter on the fixing system

[mramlawi]

Re: wave paper on GP 335

Change the Paper bring a new package of Paper and try it

[Hopper]

Re: wave paper on GP 335

If you are describing a curl in the paper after fixing which makes it jam when refeeding thru machine for a second pass (duplexing)..inspect fuser for flat spots on lower roller & check nip width. If what you are describing is a lot or wavy wrinkles that occur as paper leaves the machine your problem will be in the exit door assembly. Wrinkled/wavy copies coming out of the ir 330 / Gp 335 mean the exit rollers need replacement. Very common problem on this model.

Three rollers total and I want to say the part number of one ends in 19 or 29.

[sweet.persona]

waves in the paper on GP 335!!!!!!!!!!!!!!

Hi every body,
i have a problem with canon gp335.
the copier made wave pages,when the paper pass from the fixing unite,
i have changed the fixing roller, pressure roller,and another things but that does nothing

as the picture shows--------DSC_0034.jpgDSC_0036.jpg

[Brian8506]

Re: wave paper on GP 335

Delivery rollers on the door. I usually change all 3 though the outermost roller may still be good. FB4-2901/2902/2903

[Hopper]

Re: waves in the paper on GP 335!!!!!!!!!!!!!!

Hi every body,
i have a problem with canon gp335.
the copier made wave pages,when the paper pass from the fixing unite,
i have changed the fixing roller, pressure roller,and another things but that does nothing

as the picture shows--------[ATTACH=CONFIG]14663[/ATTACH][ATTACH=CONFIG]14664[/ATTACH]

Look at my post above. The are three silver rollers with rubber wheels on it spaced evenly. They are in the door assemble and all need replacing.