Dear I know iR2020 can use service model to adjust each tray
how about iR5570? please advise~~~many thanks
how about iR5570? please advise~~~many thanks
-
-
Re: iR5570 adjust each tray
iR5570 ,there is no adjustment for each tray in Service mode, you have to adjust each tray mechanically for Horizontal position of the paper. -
Re: iR5570 adjust each tray
Thanks so much for your replied. But adjust mechanically a little bit tough to me >"<
Vendor said need to change the control panel is it? Please advise~~~Comment
-
Re: iR5570 adjust each tray
What kind of adjustment?If it ain't broke, don't fix it
A picture is worth a thousand wordsComment
-
Re: iR5570 adjust each tray
SERVICE MODE:
COPIER> OPTION> CST> CST-U1
31: G-LTR *, 22: K LGL
COPIER> OPTION> CST> CST-U2
24: FLSC *, 26: OFI, 27: E-OFI, 36: A-OFI, 37: M-OFI
COPIER> OPTION> CST> CST-U3
34: G-LGL *, 35: FOLI, 25: A-FLS
COPIER> OPTION> CST> CST-U4
18: LTR *, 29: A-LTR
*: factory setting
COPIER> ADJUST> CST-ADJ> C3-STMTR
Use it to change the paper width basic value for STMTR in cassette 3.
COPIER> ADJUST> CST-ADJ> C3-A4R
Use it to change the paper width basic value A4R in cassette 3.
COPIER> ADJUST> CST-ADJ> C4-STMTR
Use it to change the paper width basic value for STMTR in cassette 4.
COPIER> ADJUST> CST-ADJ> C4-A4R
Use it to change the paper width basic value for A4 in cassette 4.
- Paper Types That May Be Used for the Machine
A3 A3 (297 +/- 1) x (420 +/- 1)
A4R A4R (210 +/- 1) x (297 +/- 1)
A4 A4 (297 +/- 1) x (210 +/- 1)
A5 A5 (210 +/- 1) x (148.5 +/- 1)
A5R A5R (148.5 +/- 1) x (210 +/- 1)
B4 B4 (257 +/- 1) x (364 +/- 1)
B5R B5R (182 +/- 1) x (257 +/- 1)
B5 B5 (257 +/- 1) x (182 +/- 1)
11 x 17 11 x 17 (279 +/- 1) x (432 +/- 1)
LTRR LTRR (216 +/- 1) x (279 +/- 1)
LTR LTR (279 +/- 1) x (216 +/- 1)
STMT STMT (216 +/- 1) x (139.5 +/- 1)
STMR STMTR (139.5 +/- 1) x (216 +/- 1)
LEGAL LGL (216 +/- 1) x (356 +/- 1)
Korean Government K-LGL (265 +/- 1) x (190 +/- 1)
Korean Government R K-LGLR (190 +/- 1) x (265 +/- 1)
FOOLSCAP FLSC (216 +/- 1) x (330 +/- 1)
Australian Australian
Foolscap A-FLS (206 +/- 1) x (337 +/- 1)
OFICIO OFI (216 +/- 1) x (317 +/- 1)
Ecuadorian Officio E-OFI (220 +/- 1) x (320 +/- 1)
Bolivian Officio B-OFI (216 +/- 1) x (355 +/- 1)
Argentine LTR A-LTR (280 +/- 1) x (220 +/- 1)
Argentine LTRR A-LTRR (220 +/- 1) x (280 +/- 1)
Government LTR G-LTR (267 +/- 1) x (203 +/- 1)
Government LTRR G-LTRR (203 +/- 1) x (267 +/- 1)
Argentine LGL A-LGL (220 +/- 1) x (340 +/- 1)
Government LGL G-LGL (203 +/- 1) x (330 +/- 1)
FOLIO FOLI (210 +/- 1) x (330 +/- 1)
Argentine Officio A-OFI (220 +/- 1) x (340 +/- 1)
Mexico Officio M-OFI (216 +/- 1) x (341 +/- 1)
Manual Feed Tray
SERVICE MODE:
COPIER> ADJUST> CST-ADJ> MF-A4R
Use it to change the paper width basic value for A4R in the manual feed tray.
COPIER> ADJUST> CSRT-ADJ> MF-A6R
Use it to change the paper width basic value for A6R in the manual feed tray.
COPIER> ADJUST> CST-ADJ> MF-A4
Use it to change the paper width basic value for A4 in the manual feed tray.
Size of Paper (right/left deck)
The right/left deck does not possess a mechanism to detect the size of paper, and the machine finds out the size of paper as follows:
(A4, B5, LTR)
[1] The position of the paper size guide plate of the cassette is changed.
[2] A paper size is registered in service mode.
SERVICE MODE:
COPIER> OPTION> CST> P-SZ-C1
Use it to specify a paper size for the right deck.
Settings:
6: A4, 15: B5, 18: LTR
COPIER> OPTION> CST> P-SZ-C2
Use it to specify a power size for the left deck.
Settings
6: A4, 15: B5, 18: LTR**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment
-
Re: iR5570 adjust each tray
Horizontal registration for all trays :
COPIER > ADJUST > LASER > PVE-OFST
For individual trays , read pdf file.
Side Registration Adjustment.pdfComment
Comment