[Error Code] IR 2020 install drum error messege

[adel_nathan]

hi every body
i have ir2020 photocopy machine
give me messege " the drum is not set , install drum unit '
i make all ram clear , and remove drum and reinstall it and it's dos'nt work
please help
thanks

[mramlawi]

Re: IR 2020 install drum error messege

hello
i got same problem since 1 year in a deffernet machine try to remove all the connectors from the dc control
and the main board then turn on the machine and off it will work

[zoraldinho]

Re: IR 2020 install drum error messege

Did you try to put old drum back in??

[DAG COPIERS & COMPUTERS]

Re: IR 2020 install drum error messege

Check if the developer pressure release lever mechanism is working properly. It may not be locking the drum unit securely to make proper contacts. Check also the drum contact...leaf spring on the machines body. This problem tends to be common with the Ir 2016/2020.

[adel_nathan]

Re: IR 2020 install drum error messege

thanks for you
i will check all this hints and come back by the results tomorrow
thanks again
bye

[teckat]

Re: IR 2020 install drum error messege

thanks for you
i will check all this hints and come back by the results tomorrow
thanks again
bye

Inspect>Check> & clean the high voltage contact to the drum unit-
2025.jpg

Also check the ribbon cable between the DC Controller and the HVT PCB

[adel_nathan]

Re: IR 2020 install drum error messege

thanks for your help
the problem disappear by change HVT pcb
thanks alot again
bye

[mramlawi]

Re: IR 2020 install drum error messege

Good to hear that