If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Check the rotation of the fixing motor (the connector is physically removed or disconnected)
-> replace the fixing motor or the harness
The connectors of the pressure sub thermistor (THM2, 3, 4) are physically removed (the cable is caught, or disconnected)
-> replace the thermistor or the presure stay
Disconnection, soiled, improper location of, or faulty pressure sub thermistor
-> clean the thermistor or replace it.....
Check the rotation of the fixing motor (the connector is physically removed or disconnected)
-> replace the fixing motor or the harness
The connectors of the pressure sub thermistor (THM2, 3, 4) are physically removed (the cable is caught, or disconnected)
-> replace the thermistor or the presure stay
Disconnection, soiled, improper location of, or faulty pressure sub thermistor
-> clean the thermistor or replace it.....
What is a iR7500 ??
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment