[Misc] and stabilize the color in the ip 7000 vp

[luisalberto9999]

newsletters help with this thanks
700 prints each color is not maintained

[vigour]

Re: and stabilize the color in the ip 7000 vp

This may be a stupid question, but:
Have you done autograd and calibration yet.

[luisalberto9999]

Re: and stabilize the color in the ip 7000 vp

ok I understand wanting to be more specific.
every day is the automatic adjustment of the scanner as three plies internal adjustment printer mode 5 leaves.
internal temperature 7000vp is 35 degrees Celsius, the developing units are new, the drums are new.
even so the color does not convense, my impression is coverage of a minimum of 30% for each color, and priority is 300 grams in paper format 13 X 19.
the circulation that varies the color is 300, the color is low, I get the impression that feeds little toner , does not give me any code or any alarm.
average densities in the four colors is -2
Thanks for the suggestions

[zoraldinho]

Re: and stabilize the color in the ip 7000 vp

-install last system software 88.03

-check drum temperature (35-37 c)

-check posted setting for image-related issues

ipc7000vp-048.pdf