Drum middle volume. (iR 5000 series)

[Ingranaggio_rotto]

Hello everyone!
A curiosity ... Is there a method, a product, a trick to cover the small holes that can form on the surface of the drums of the iR 5000?

[vigour]

Re: Drum middle volume. (iR 5000 series)

Clear nail polish or crazy glue has been suggested for small dings and scratches.

I don't think you can see the arc marks most times.
make sure to clean/ change your transer/sep within the specified periods.
It's much cheaper than a drum replacement.
Transer/sep arcing has been a problem since NP7550

[Ingranaggio_rotto]

Re: Drum middle volume. (iR 5000 series)

"Crazy glue" ? I do not understand? You can translate it in another way?
Thank you !

[JustManuals]

Re: Drum middle volume. (iR 5000 series)

Hello everyone!
A curiosity ... Is there a method, a product, a trick to cover the small holes that can form on the surface of the drums of the iR 5000?

If we told you, we'd have to kill you too.

[Ingranaggio_rotto]

Re: Drum middle volume. (iR 5000 series)

[vigour]

Re: Drum middle volume. (iR 5000 series)

Cyanoacrylate
Use extreme caution

[Oze]

Re: Drum middle volume. (iR 5000 series)

The pinholes on the surface of the drum tend to come from the Trans/sep Corona arcing to the drum and damaging it...as Vigour stated.
Best way to avoid the damage is to either rewire your Primary units OR replace them completely.

[Ingranaggio_rotto]

Re: Drum middle volume. (iR 5000 series)

Thanks for the tips!