Error code E733 0001 during installation. IPC6010 + creo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • twinax
    Technician

    50+ Posts
    • Feb 2008
    • 82
    #1

    Error code E733 0001 during installation. IPC6010 + creo

    Hi guys,

    We are installing an imagePRESS C.6010 + creo. Engine works but very (too) often engine stops with error code E733-0001 (communication problem) a lot of connections has been checked.

    Same problem engine alone (without sorter and POD)

    Do you have any experience about this error code?

    Kind regards,

    Twinax.
    Remember Murphy's Law.
    Tags: ipc; 6010; creo; e733
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Error code E733 0001 during installation. IPC6010 + creo

      Originally posted by twinax
      Hi guys,

      We are installing an imagePRESS C.6010 + creo. Engine works but very (too) often engine stops with error code E733-0001 (communication problem) a lot of connections has been checked.

      Same problem engine alone (without sorter and POD)

      Do you have any experience about this error code?

      Kind regards,

      Twinax.


      Ensure all system software for the machine and accessories match according to the released version.


      Check all connectors on DC controllers 1-1, 1-2, and 1-3
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • twinax
          Technician

          50+ Posts
          • Feb 2008
          • 82
          #3
          Re: Error code E733 0001 during installation. IPC6010 + creo

          Hi,

          I will check it tomorow (monday).

          And keep you informed.

          Have a nice sunday.

          Regards,

          Twinax
          Remember Murphy's Law.

            Comment

            • twinax
              Technician

              50+ Posts
              • Feb 2008
              • 82
              #4
              Re: Error code E733 0001 during installation. IPC6010 + creo

              Hello,

              Situation become catastrophic... 15 days after installation engine still locked by error code E733.

              Several PCB has been replaced: DC-Con1-1 , 1-2 , 1-3, tranceiver PCB, main _M PCB, DC-Con clear done. CK-YM Bundle between Main_M and DC-Con 1-1 replaced. All connections checked several times.

              Configuration ImagePRESS C.6010 (version 88.03) Creo Version 2.1. POD, Stacker high capacity.

              Any other suggestion ?

              Kind regards.
              Remember Murphy's Law.

                Comment

                • zoraldinho
                  teacher-guide-expert-guru

                  Site Contributor
                  5,000+ Posts
                  • Mar 2008
                  • 5001
                  #5
                  Re: Error code E733 0001 during installation. IPC6010 + creo

                  Could be a printer power supply issue.Start with replacing a cable connection between DC controller PCB 1-3 and main controller PCB (MAIN-P).

                  I believe you folow the procedure:

                  When turning OFF the main power, both
                  the main unit and accessories must be
                  turned OFF. When turning the main
                  power back ON, turn the accessories ON
                  first, then the main unit.

                  This one is from teckat knowledge base.

                  TP12.pdf

                  smile.jpg
                  If it ain't broke, don't fix it
                  A picture is worth a thousand words

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16083
                      #6
                      Re: Error code E733 0001 during installation. IPC6010 + creo

                      Originally posted by twinax
                      Hello,

                      Situation become catastrophic... 15 days after installation engine still locked by error code E733.

                      Several PCB has been replaced: DC-Con1-1 , 1-2 , 1-3, tranceiver PCB, main _M PCB, DC-Con clear done. CK-YM Bundle between Main_M and DC-Con 1-1 replaced. All connections checked several times.

                      Configuration ImagePRESS C.6010 (version 88.03) Creo Version 2.1. POD, Stacker high capacity.

                      Any other suggestion ?

                      Kind regards.




                      READ -------Error 733_TP12 042[1].pdf
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • zoraldinho
                          teacher-guide-expert-guru

                          Site Contributor
                          5,000+ Posts
                          • Mar 2008
                          • 5001
                          #7
                          Re: Error code E733 0001 during installation. IPC6010 + creo

                          Originally posted by teckat
                          READ -------[ATTACH]14721[/ATTACH]
                          The Same PDF twice.
                          If it ain't broke, don't fix it
                          A picture is worth a thousand words

                            Comment

                            • twinax
                              Technician

                              50+ Posts
                              • Feb 2008
                              • 82
                              #8
                              Re: Error code E733 0001 during installation. IPC6010 + creo

                              Hello,

                              Unfortunately, all points has been checked several times without any result.

                              Main-P, main-M ,all DC-Con has been changed, also 3 x cables between DC-Con and Main-P.

                              We have noticed that on some prints printed (and locked into engine), before error code, one color is missed (often magenta).

                              Sometime, also when problem (code) arrive, black or magenta color are shifted on paper (5 mm) into horizontal direction.

                              Memories on Main-M (DDR SDRAM?)

                              What can I do now...?

                              Thanks for your help,

                              Twinax
                              Remember Murphy's Law.

                                Comment

                                Previous template Next
                                Working...