Potential control system theories

[Rachid.Akli]

Dear all

I observed that many CQ issues are posted about mainly printers/copiers above 50 ppm. They could be well understood if we integrate the potential control in the issue analysis. So i just would like to initiate a discution about it.

Rachid.

[sweet.persona]

Re: Potential control system theories

Hi to all

In a copier apparatus having a photosensitive member such as a drum, good reproductivity and image density results from applying a proper charging potential to the photosensitive substance on the drum. The optimum charging potential for each drum can be predetermined and a code or indicia representative of such optimum potential may be attached or otherwise appended to the drum. This code is read by a suitable sensor which in turn controls the charging potential applied to the drum. but by the way always i turn it off ------PO-CNT. -----OFF -- that make me Win more time.