E0013-0000 code in IR 6570

[manoj1686]

E0013-0000 code shown in IR 6570
am replace Waste toner bottle and clean drum unit and waste pipe
pls help me

[jiongpao]

Re: E0003-0000 code in IR 6570

should check on main thermistor. Normally when this happen i will clean up those 3 things together - sub thermistor, main thermistor and thermostat. You can try to clean those with autosol liquid. If the problem still the same u might need to change main thermistor.

[manoj1686]

Re: E0003-0000 code in IR 6570

should check on main thermistor. Normally when this happen i will clean up those 3 things together - sub thermistor, main thermistor and thermostat. You can try to clean those with autosol liquid. If the problem still the same u might need to change main thermistor.

am sorry code is E0013-0000

[zoraldinho]

Re: E0013-0000 code in IR 6570

The waste toner pipe is identified as being clogged.Use wacuum cleaner.Check the connector for any fault in connection.Check the waste toner feedscrew lock detecting switch.

[teckat]

Re: E0003-0000 code in IR 6570

am sorry code is E0013-0000

check the switch position

[mramlawi]

Re: E0013-0000 code in IR 6570

check the switch position and the sensors

[montana]

Re: E0013-0000 code in IR 6570

clean the sensor and the transparent side of the bottle.........

[bad78]

Re: E0013-0000 code in IR 6570

E0013-0000 code shown in IR 6570
am replace Waste toner bottle and clean drum unit and waste pipe
pls help me

check the switch position

[spectraindo]

Re: E0013-0000 code in IR 6570

Check the waste toner pipe and coil spring inside pipe.
Clogged toner can damage the spring.
See pdf