canon ir2020 false jam

[Gurdeep123]

Re: canon ir2020 false jam

Good Morning Sir. Thanks again. It make sense. How to do extra winding of spring on this flag at lower door. I appreciate it. My regards.

---

Thanks,
Could be any cause, many sensor issues involving paperpath, are usually caused by customers slamming doors, and or cassette trays on printer in frustration.
Causes flags to dislodge, stick or even fall off.

Some spring action needs an extra winding on flags in certain printers.
👍 luck[/QUOTE]

[teckat]

Re: canon ir2020 false jam

Good Morning Sir. Thanks again. It make sense. How to do extra winding of spring on this flag at lower door. I appreciate it. My regards.

---

Thanks,
Could be any cause, many sensor issues involving paperpath, are usually caused by customers slamming doors, and or cassette trays on printer in frustration.
Causes flags to dislodge, stick or even fall off.

Some spring action needs an extra winding on flags in certain printers.
�� luck

[/QUOTE]


When accessible, I used a captive/retractable spring hook.

Self retracting hook is concealed for easy positioning then positively grips spring until released with a push of the button..

Captive Spring Hook

See links

Remember, not all of these flags need an extra winding ,in some cases u would put too much pressure for spring retraction, or action from paper leading edge.


Attention Required! | Cloudflare