If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
that card is located in the socket where I will place the open interface .
put in the Open Interface in it's place
that other card (UFRII/PCL Kit Card which is standard in the i series) is not needed- On the i models (C5180i / C4580i / C4080i), the printer kit is standard and cannot be transferred./
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment