Canon IRC1022i Initialization

[Alex ahir]

Re: Canon IRC1022i Initialization

Hello everyone,

for canon IRC 1022 to enter the sevice mode you have to press main menu than 2 and 8 and main manu,

I was pressing additional function and 2,8 but i can not able to go in but i try some more function and it works for me.

so many guys they dont know how to go in service mode on this model. This will add more knowledge to your technical field.

[zoraldinho]

Re: Canon IRC1022i Initialization

i try 7654321 but no luck, how to go to service mode

If you don't know canon service mode code,you have nothing to do in.

[Rachid.Akli]

Re: Canon IRC1022i Initialization

Hi to all

1-Press "Main Menu" button.
2-Press "Additional Func" button.
3-With the arrows or the scroll wheel, go to"ID System Management System", then press ok
5- If you're asked to enter a password, use the "7654321" combination.
6-Go to "Network settings" and press OK.......

Good luck.

Rachid.

[Alex ahir]

Re: Canon IRC1022i Initialization

i try 7654321 but no luck, how to go to service mode

[zoraldinho]

Re: Canon IRC1022i Initialization

Use Ariel's suggestion.

[Alex ahir]

Re: Canon IRC1022i Initialization

how to go to service mode on this model?

[arielcanon]

Re: Canon IRC1022i Initialization

Try default setting for user and password = 7654321. If failed, reset password on service mode

[Alex ahir]

HI guys how to initialize IRC1022i. coz i want to give a static ip to the copier but when i go to the sys management it is asking a user and password. i dont know what is user and password