Advance 5051 Quick Menu button no response

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • KL568
    _

    250+ Posts
    • Feb 2011
    • 324
    #1

    [Misc] Advance 5051 Quick Menu button no response

    Hi, all

    Have anybody came across Quick Menu button when press, there is no response ? Access from RUI, also unable to see the web link for Quick Menu as compare another unit of 5051 which have it.

    The relevant service mode is set as 1; firmware is v64

    Had upgrade firmware to v69 but still NG. Set Service Mode for Quick Menu to 0 and reboot; set it back as 1 & reboot, also a dead end.

    Thank you in advance for any leads provided
    Tags: None
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5000
      #2
      Re: Advance 5051 Quick Menu button no response

      try with self diagnostic test?
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • KL568
          _

          250+ Posts
          • Feb 2011
          • 324
          #3
          Re: Advance 5051 Quick Menu button no response

          Machine full features works including access via CDS firmware update, only that Quick Menu don't work.

          Had ask around my local support, facing similar issue. Their only few solutions is Format HDD / Replace HDD / Initialize All Data ( which I try and 20 minutes later, Quick Menu button came back normal) but this last solution has been tried by my local support, problem came few months later.

            Comment

            • zoraldinho
              teacher-guide-expert-guru

              Site Contributor
              5,000+ Posts
              • Mar 2008
              • 5000
              #4
              Re: Advance 5051 Quick Menu button no response

              Good to know.Swap the disc with the same model to be shore.
              If it ain't broke, don't fix it
              A picture is worth a thousand words

                Comment

                • KL568
                  _

                  250+ Posts
                  • Feb 2011
                  • 324
                  #5
                  Re: Advance 5051 Quick Menu button no response

                  Yes, only those 3 seems to solve the problem & return Quick Menu button to normal.

                  Was thinking, any of you guys' might have came across this issue and have a better solutions than mine's, which wasted time or parts replace of perfectly working HDD.

                    Comment

                    Previous template Next
                    Working...