Canon clc 3220, screen goes blank just as it starts to feed a sheet

[Guest]

Hi Guys,

My 3220 has just started this problem, just as it starts to feed a sheet either from drawer1 or s/bypass, the machine almost shuts down,
i get a blank screen and the normal beep like there is a jam or something. There is no error message but the machine is still on.
Any ideas??

[teckat]

Re: Canon clc 3220, screen goes blank just as it starts to feed a sheet

Hi Guys,

My 3220 has just started this problem, just as it starts to feed a sheet either from drawer1 or s/bypass, the machine almost shuts down,
i get a blank screen and the normal beep like there is a jam or something. There is no error message but the machine is still on.
Any ideas??

power off/open back of printer

remove Memory (all) clean ends & re-seat

[matrixgav]

Re: Canon clc 3220, screen goes blank just as it starts to feed a sheet

power off/open back of printer

remove Memory (all) clean ends & re-seat

Thank you very much, it worked straight away

[teckat]

Re: Canon clc 3220, screen goes blank just as it starts to feed a sheet

Thank you very much, it worked straight away

COLOR HAND.jpgyour welcome

[mramlawi]

Re: Canon clc 3220, screen goes blank just as it starts to feed a sheet

if this problem comes back again try this solutions , First of all change the power supply must work if not try the 2nd choice clean the filter of the fan that located on the back of the machine (MFC FAN) and dont let the copier be so close to the wall .if didnt work also Change the MFC BOARD and it will work C YA