canon image runner advance 6055

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bonny
    Junior Member
    • Sep 2012
    • 6

    canon image runner advance 6055

    Dear All,
    can anyone cone across the issue below:
    After installing new canon iR advance 6055 all try are not working it is showing jam paper error from try one and two ,
    only bypass can work properly.

    any help or idea is highly appreciate
  • roller
    Technician
    • Apr 2010
    • 26

    #2
    Re: canon image runner advance 6055

    Originally posted by bonny
    Dear All,
    can anyone cone across the issue below:
    After installing new canon iR advance 6055 all try are not working it is showing jam paper error from try one and two ,
    only bypass can work properly.

    any help or idea is highly appreciate
    Recheck this steps of installation:
    install.JPG

    Comment

    • KL568
      _

      250+ Posts
      • Feb 2011
      • 324

      #3
      Re: canon image runner advance 6055

      Hi,

      Is Tray 3 and Tray 4 giving paper jam too?

      If not, then pull out Left paper Deck and Right paper Deck, look for a white plastic block. Loosen 1 screw and move it to other direction.

      Comment

      • canonbundy
        Senior Tech

        500+ Posts
        • Jun 2012
        • 607

        #4
        Re: canon image runner advance 6055

        I come across these situations all the time with Junior or inexperienced Techs dealing with Canon Products - you MUST follow the Installation Instructions on all Canon Boxes especially the Advance Range - the other replies are correct, adjust the white nylon blocks from position 1 to 2 in Left & Right Decks (Cassettes 3 & 4 not affected).

        Comment

        • bonny
          Junior Member
          • Sep 2012
          • 6

          #5
          Re: canon image runner advance 6055

          Originally posted by canonbundy
          I come across these situations all the time with Junior or inexperienced Techs dealing with Canon Products - you MUST follow the Installation Instructions on all Canon Boxes especially the Advance Range - the other replies are correct, adjust the white nylon blocks from position 1 to 2 in Left & Right Decks (Cassettes 3 & 4 not affected).

          Thanks all for your support ; may God keeps blessing you .it is now working properly.

          what i facing now is that i can't enter management settings . i wanted to configure it to network


          with thanks ,

          Bonny

          Comment

          • roller
            Technician
            • Apr 2010
            • 26

            #6
            Re: canon image runner advance 6055

            Originally posted by bonny
            Thanks all for your support ; may God keeps blessing you .it is now working properly.

            what i facing now is that i can't enter management settings . i wanted to configure it to network


            with thanks ,

            Bonny
            Enter user mode and log in as administrator. Default u name and pwd is 7654321.

            Comment

            • KL568
              _

              250+ Posts
              • Feb 2011
              • 324

              #7
              Re: canon image runner advance 6055

              Hi,

              ID 7654321

              PIN 7654321

              You ought heed to advice given, get trained and get a service manual.

              You akin to driving a 4 by 4 Rover but holding a driving license of a 500cc motorbike.

              Comment

              • bonny
                Junior Member
                • Sep 2012
                • 6

                #8
                Re: canon image runner advance 6055

                Thanks so much for your delicious supports.
                stay blessed

                Comment

                Working...