canon ir2022

[montana]

hi,,,ir 2022 when i power the machine on the initialization bar stop in the middle and stay there....is there
any suggestion about this issue???

[mramlawi]

Re: canon ir2022

looks like the dc contraller fault

[teckat]

Re: canon ir2022

hi,,,ir 2022 when i power the machine on the initialization bar stop in the middle and stay there....is there
any suggestion about this issue???

LAN pcb may be faulty. This is the pcb that the network cable plugs into and is also referred to as the NIC (Network Interface Card) by some people-

unplug LAN pcb from printer> & power up >

if ok on power up / LAN Pcb could be defective

DDR module can also be defective / remove and re-seat/or replace
the none 'I' model has only one DDR module

[Rachid.Akli]

Re: canon ir2022

looks like the dc contraller fault

Hi to all

The issue is probably due to the main controller more than the Dc controller.

Rachid.

[montana]

Re: canon ir2022

hi....thanks guys..i'll try and feedback