[Repair]DC controller ir5065

[Phil B.]

Re: [Repair]DC controller ir5065

Due to faulty toner motor fuse blown in DC controller PCB
Replace motor and fuse in dc.

this thread is 8 years old...

dead thread.

[mehta]

Re: [Repair]DC controller ir5065

do you have the toner problem e025 or something? Blown fuse.

Due to faulty toner motor fuse blown in DC controller PCB
Replace motor and fuse in dc.

[mehta]

Re: [Repair]DC controller ir5065

Thank you very much.

[Simons]

Re: [Repair]DC controller ir5065

do you have the toner problem e025 or something? Blown fuse.

[makmee]

Re: [Repair]DC controller ir5065

Just a Hint: There are several fuses soldered on this bord, mostly of yellow or orange color, check them first and if defect, replace. I have repaired several Controllers this way, saving large amount of $

Thank you For ideas

[makmee]

Re: [Repair]DC controller ir5065

[ATTACH]17673[/ATTACH]

Thank you very much

[Herrmann]

Re: [Repair]DC controller ir5065

Just a Hint: There are several fuses soldered on this bord, mostly of yellow or orange color, check them first and if defect, replace. I have repaired several Controllers this way, saving large amount of $

[zoraldinho]

Re: [Repair]DC controller ir5065

dc con ir 5065.pdf

[makmee]

Hi all,

I have DC controller ir5065

I need Repair

I need Circuit Diagram

Send to pm or post

Thanks in advance