GP200 Fuser Cam Stop

[mkaney]

The fuser cam stop broke on our Canon GP200. When I pulled the broken one off, a spring came off with it, but it came off before I was able to see how it attached. It is the spring that provides the tension to force the stop toward the cam. Anyone have any idea how to properly attach a new fuser cam stop on one of these things?

Thanks,
Matthew Kaney
Santa Barbara, CA

[rambo40]

Hi,
First you have to install the cam stop onto the small shaft.The spring goes on top.The spring is held in by a c-clip.The torsion of the spring forces the cam stop towards the front door.
Hope this helps,it has been a while.

[lkrsardis]

gp200

Maybe this will help. Item #54 is what you are looking for. Position the spring to force the black lever away from the frame.