E161-403F

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • skazic
    Technician
    • Nov 2009
    • 25
    #1

    [Error Code] E161-403F

    Regards,
    I have iPF9100 that has this error
    Replaced the head, flex cable, PCB cariage, head PCB and main PCB
    printer was working about 2 months and appeared again the same error
    Do you have any ideas
    Thanx
    Tags: None
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5007
      #2
      Re: E161-403F

      Firmware upgrade? OEM ink?

      Subject:

      Error record of Head Temperature Rise error
      Detail:

      When the Temperature Rise error (E161-403E or 403F) occurs, three records are recorded per error on the error
      record of Print.Inf. Therefore, the frequency of occurence should be counted as once for three records. A countermeasure
      will be taken so that one record is recorded per error.
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • skazic
          Technician
          • Nov 2009
          • 25
          #3
          Re: E161-403F

          Use genuine ink and the last version of fw is on printer.

            Comment

            • V-P
              Senior Tech

              Site Contributor
              500+ Posts
              • Apr 2011
              • 679
              #4
              Re: E161-403F

              Actually that one in old machines is a BIATCH !

              I have had it in 2 occasions.
              First (iPF8000) customer dropped out (it was not financially worthy).

              On the second case we replaced "at the same time"
              Mainboard + carriage system + 2PF03

              Than it worked...

              Good Luck !

                Comment

                Previous template Next
                Working...