IR2520 add paper

[COPIERTEC ASSOCIATES]

Re: IR2520 add paper

I have come across over 10 ten machines in the field with this problem.Many times i have re-opened the machine to make sure the cassette latches lock properly,but the machines will detect the paper for
a short while and go back to the same scenario,despite some times putting some supportive device to keep the cassette in place.On closer observation,the problem could be a factory default because in all this attempts sometimes i have changed sensors to no success.It is a topic worth discussing.

Re: IR2520 add paper

Hi,
you need to remove the paper behind the cassette.
Possibly the cassette must mechanically adjusted, so that sensors can be pressed to the paper size.

IMG-20121212-00029.jpg

[teckat]

Re: IR2520 add paper

Hi
I have problem with IR2520 because they show ''add paper'' even if the paper is full in cassete. When I take out the paper cassete and push it back and press 3sec. to end after that the copier detect the correct format and level of paper.
I think this is not mechanical error but Im not shure?
Do you have any other idea?

Thank you

Bole

make sure your cassette latch is locking properly to printer body/ remove covers to inspect & adjust

remove cassettes look inside to make sure nothing is blocking tray switches (torn paper)

[Bole]

Hi
I have problem with IR2520 because they show ''add paper'' even if the paper is full in cassete. When I take out the paper cassete and push it back and press 3sec. to end after that the copier detect the correct format and level of paper.
I think this is not mechanical error but Im not shure?
Do you have any other idea?

Thank you

Bole