[Error Code] Canon ir2200 e-000677-8502

[sweet.persona]

Hi to all

i have replaced an old hdd by a new one (HHD ir3300) in CANON IR2200, but it desplays E-000677-8502
how can i resolve this problem??and does the ir3300's hdd software work with ir2200?

Note: The new HDD have network sys installed on it,but there's no Network sys slot in the machine


Thanks in advance.

[zoraldinho]

Re: Canon ir2200 e-000677-8502

E677 is wrong combination issue.Use SST and appropriate firmware.

[teckat]

Re: Canon ir2200 e-000677-8502

Hi to all

i have replaced an old hdd by a new one (HHD ir3300) in CANON IR2200, but it desplays E-000677-8502
how can i resolve this problem??and does the ir3300's hdd software work with ir2200?

Note: The new HDD have network sys installed on it,but there's no Network sys slot in the machine


Thanks in advance.

E677 = PDL board mounting error

E677-0001 error indicates that the Main Controller firmware and the Boot-ROM are incompatible (ex: Boot-ROM is at copier level and the system software is at network level, or vice versa). Either install the correct Boot-ROM chip or flash the MN-cont with the correct version of firmware.



check BOOT ROM
check print board used

A fault occurs it the combination between any of the printer boards (accessories) and the main controller PCB.
Main cause
--Any of the printer boards (accessories) is faulty.
The main controller PCB is faulty.
Action
1. Connector
Is the printer board (accessory) connected correctly?
NO: Correct the connection.
2. Printer board, Main controller PCB
Try replacing the printer board. Is the problem corrected?
YES: End.
NO: Replace the main controller PCB.


in other words---------what options pcb's are installed