-
-
Canon GP605 = iR600
This is a Canon iR600 in the US market. It doesn't have to have a finisher-D1. All it needs is an exit tray.
These machines are plug & play. That is, there is no special simulation to enable the accessories. The are recognized immediately at boot up.
If paper still won't exit you have a feed problem, not the lack of a finisher.
Jam codes?
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment