[CQ] Canon IRC-4080 copy quality issues

[jose antonio]

Hi

Hi Guys,

I'm back again with mi Canon IRC-4080.
This machine is giving me strange cq problems.
just calibrated the Fiery H1 with color call , but still the colors come out dark when printing from any file other then "color draw".
Driver installed is PCL6 on Windows 7
If i print a word file the colors come to dark and colors are off.
Drums and toners are ok. checked everything in service mode, can,t see anything wrong.
When printing from color draw the colors come out better, but still it lacks the brightness. The prints are not brilliant like they so-pose to be.
Also When copying from platen glass, same problems.
I have a Kyocera with worn out drums, and the prints come out much brighter printed from any type of file.

Any ideas very much appreciated.

[lepo2005]

Re: Canon IRC-4080 copy quality issues

I would try to print with the Canon Postscript Printerdriver // Do you made an Auto Gradation Adjust ?

[jose antonio]

Re: Canon IRC-4080 copy quality issues

I would try to print with the Canon Postscript Printerdriver // Do you made an Auto Gradation Adjust ?

Now i am more confused, there are so many drivers to choose.
Do you know witch one? Mi driver was installed from canon site IRC-4080 H1 (pcl6), but now i see there are drivers for the Imagepass H1 also. I don,t see a Postscript driver on the H1 list.

[lepo2005]

Re: Canon IRC-4080 copy quality issues

You can donload the driver for the imagepass H1 printerunit directly from www.efi.com

[jose antonio]

Re: Canon IRC-4080 copy quality issues

You can donload the driver for the imagepass H1 printerunit directly from www.efi.com

Thank you lepo,

I finally fixed the issue , had to re install windows on mi system first for another issue than I downloaded the H1 ps driver directly.
Colors are ok now on the irc-4080 , Thanks for the tip!