If anyone out there is servicing a fedex office store Im sure you have certainly gotten to work on the 8105 pro puncher c1. I dont have alot of pro punch experience but they seem pretty damn hard to work on to me. This one jams in the dieset 8 (comb or spiral dieset) every time right at the dieset. About 1/3 of the operator side of the paper is punched and the rest is only indented. Stops dead in its tracks same place, same way every time. It only does it on cardstock 80lb or heavier, on this dieset only. I have ran 3 hole punch cardstock and it will punch all day. This dieset is brand new and works fine on the other pro puncher 8105 right across from it. I replaced the dieset drive clutch today and did not help at all. Im feeling like its probably an issue inside the punch module assy but it looks really bad to get out and the part manual has npn listed for the assy. If someone can shed some light on this for me, I would be very grateful.
Comment