newbee on CANON

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Zeldaman
    Senior Tech

    500+ Posts
    • Mar 2011
    • 946
    #1

    newbee on CANON

    Hi there!
    I want to introduce myself to the canon-forum. The last 26 years i worked on Konika-Minolta & Ricoh machines. Our firm was soled to a great Canon-dealer, now we have to work on Canon either. Last week i installed my first system, an IR C2225i with fax-unit! WOW!!!!On KM you have parts & screws... but this assembly of the Canon was a really new feeling! Ricoh, unpacking, removing some tapes, inserting toner & checking and calibrating →OK. But this machine was a little bit of a shock for me. Why didn't they print "Revell" on the box? I think it's more complicated, then it has to be.
    Nevertheless i hope to get some tip's & trick's in the 1. time until i get trainings & experiencies.
    Greetings...
    Tags: None
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5002
      #2
      Re: newbee on CANON

      Welcome to Copytechnet Zeldaman. This is the place with a lot tips and tricks.


      th_2sgn054groupwelcome.gif
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • canonbundy
          Senior Tech

          500+ Posts
          • Jun 2012
          • 607
          #3
          Re: newbee on CANON

          Welcome to the CANON WORLD - it started like this....................IN A GALAXY FAR FAR AWAY..............................

            Comment

            • Tricky
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 2621
              #4
              Re: newbee on CANON

              Hi welcome to the Canon world.

              Its the opposite for me we in the workshop we mainly do Canon then Kyocera , Ricoh and once every six months a KM/Bizhub.

              We unbox the machines fit pedestals / doc feeders etc. The Bizhub had me searching this site for the service mode and is booby trapped, if you don't follow the instructions to the letter you get cyan lines on the copies, at least Canon haven't done anything like that with their machines.

              As for Canon having "Revell" on the box Ricoh should have "Meccano" on theirs

              ricoh fax.JPG

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22960
                  #5
                  Re: newbee on CANON

                  Welcome! =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • SCREWTAPE
                      East Coast Imaging

                      Site Contributor
                      2,500+ Posts
                      • Jan 2009
                      • 3396
                      #6
                      Re: newbee on CANON

                      Originally posted by Zeldaman
                      Hi there!
                      I want to introduce myself to the canon-forum. The last 26 years i worked on Konika-Minolta & Ricoh machines. Our firm was soled to a great Canon-dealer, now we have to work on Canon either. Last week i installed my first system, an IR C2225i with fax-unit! WOW!!!!On KM you have parts & screws... but this assembly of the Canon was a really new feeling! Ricoh, unpacking, removing some tapes, inserting toner & checking and calibrating →OK. But this machine was a little bit of a shock for me. Why didn't they print "Revell" on the box? I think it's more complicated, then it has to be.
                      Nevertheless i hope to get some tip's & trick's in the 1. time until i get trainings & experiencies.
                      Greetings...
                      Do not be discouraged its just an adjustment

                        Comment

                        • teckat
                          Field Supervisor

                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16083
                          #7
                          Re: newbee on CANON

                          Originally posted by Zeldaman
                          Hi there!
                          I want to introduce myself to the canon-forum. The last 26 years i worked on Konika-Minolta & Ricoh machines. Our firm was soled to a great Canon-dealer, now we have to work on Canon either. Last week i installed my first system, an IR C2225i with fax-unit! WOW!!!!On KM you have parts & screws... but this assembly of the Canon was a really new feeling! Ricoh, unpacking, removing some tapes, inserting toner & checking and calibrating →OK. But this machine was a little bit of a shock for me. Why didn't they print "Revell" on the box? I think it's more complicated, then it has to be.
                          Nevertheless i hope to get some tip's & trick's in the 1. time until i get trainings & experiencies.
                          Greetings...

                          welcome

                          Efficiency_Expert.JPG



                          a good .pdf read on CANON Technology

                          Attached Files
                          Last edited by teckat; 02-03-2013, 06:50 PM.
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            Previous template Next
                            Working...