IR3220 Jamming

[Brian8506]

Re: IR3220 Jamming

Entire right door. Same as 4 months ago. Most of the time it has trouble getting to flag in pfu 1. It's working now. I'll see what happens. Thanks for all the replies

[teckat]

Re: IR3220 Jamming

Entire right door. Same as 4 months ago. Most of the time it has trouble getting to flag in pfu 1. It's working now. I'll see what happens. Thanks for all the replies

point-

make sure that lower cassette does not have that broken plastic wheel under metal slide adjust plate/

take out cassette>remove paper> turn tray upside down & shake > see if it falls out/
when broken < paper shifts the plate over> cause mis-feed pic up delay-----------------------
also check if tray locks in proper> to make proper contact with tray identity switches in back

had many of these lower trays bounce away from switches during copying vibration>causing delay jams

[Brian8506]

Re: IR3220 Jamming

I checked that. I actually repaired that tray about a year ago and its held up good.

point-

make sure that lower cassette does not have that broken plastic wheel under metal slide adjust plate/

take out cassette>remove paper> turn tray upside down & shake > see if it falls out/
when broken < paper shifts the plate over> cause mis-feed pic up delay-----------------------
also check if tray locks in proper> to make proper contact with tray identity switches in back

had many of these lower trays bounce away from switches during copying vibration>causing delay jams